Firmware installer

Desktop or Laptop Only

Flash from a desktop or laptop only. Vidiotbox firmware flashing needs a USB serial connection through Chrome or Edge.

Open this page on that computer, plug Vidiotbox in with a data-capable USB cable, then use the Connect button.

Vidiotbox Simulator Hardware Docs
USB firmware installer

Vidiotbox Flasher

Flash Vidiotbox hardware directly from Chrome or Edge using the ESP32-S3 USB serial bootloader.

Copyright (C) 2026 Paul Hodara. Vidiotbox hardware software. All rights reserved.

Install Firmware

vidiotbox_V101-RF2_Basel

Commit date: 2026-06-17

Current Vidiotbox RF2 Basel firmware. Connect the board over USB, choose its serial port, then start the install.

vidiotbox_V1-RF2_Basel

Commit date: 2026-06-17

Previous RF2 Basel firmware kept for version history. This writes the bootloader, partition table, boot app, and firmware image.

V10_Basel

Commit date: 2026-06-16

Earlier Vidiotbox hardware firmware built from the local vidiotbox-hardware project.

SD Card Assets

This browser flasher updates internal ESP32-S3 flash only. Runtime Faceimator images, GIFs, sounds, and SD-card configuration still live on the microSD card.